You'll put your eye out...

Very cool - a "Post to Blog" function.  I thought I'd give it a try, since this post has some hopefully good information in it.

pH Probes and Meters for the (per)chlorate process


I spent far too much time on pH probes today.  Again, the idea behind the simple bucket cell is so one doesn't have to mess with pH probes and meters, but I...

When I first joined APC as a member, I designed a ball mill that was as simple as I could make it, with the thought that it could be replicated by just about anyone, via plans or a kit.  While in appearance it was fairly crude, it has done an outstanding job, and the basic design is sound.

In the server transition, it seems that there has been a bit...

Hello everyone - it's been a long time!  There was a period where I was posting a blog almost weekly.  Then, I ended up working on projects that weren't blog-worthy.  I also need to get my rear in gear for the fourth of July.  Last year, I shamed myself with a paltry performance with a few festival balls and such.  This year will...

There are two bothersome problems when you use a traditional strap of titanium to deliver current to either the anode or the cathode in a (per)chlorate cell.  The first, and most troublesome, is the cutting and sealing of an appropriate slot in the lid of your cell for a strap that measures perhaps 1mm x 25mm.  In thin...

If you haven't been keeping up, (and if you care...   ) I have been blogging fast and furious while the LD anode is undergoing its first real test.  If you'd like, it might be worth going back about a week to catch up.  This entry will be more pictures, less text.

Basically, a few of the warts on one edge had...